6.Inspect all Hoses for damage. Replace if damaged. DO NOT use the machine until any damaged hoses are replaced. Inspect weekly.
7.Inspect all Fittings and Clamps. Insure all Fittings and Clamps are properly tightened. Inspect weekly.
Dry Cutting Engine Maintenance
9When operating the engine in dry cutting or dusty environments the following is required:
9Engine oil changed more often.
9Every 50 hours (or more often if conditions require) clean all of the engine cooling fins.
9Every 25 hours (or more often if conditions require) clean the engine pre- cleaner.
9Every 100 hours (or more often if conditions require) replace the air filter. If the engine is equipped with a reusable air cleaner, clean and
9Check and clean the air filter after each use. Replace as needed.
Air Filter C31xx:
The C31xx Classic series Diesel Concrete saw is equipped with a Deutz Dry Type Air Cleaner.
Deutz Air
Cleaner 31HP
Only
Location of 31HP Air Filter | 31HP Air Filter Components | ||
ITEM | DESCRIPTION |
| PART No. |
| AIR FILTER ASSEMBLY TOP 31HP (Includes: |
| |
| Dust Boot, Filter Element, Housing Top, |
| |
1 | Housing Bottom, and Clamp) |
| 237281 |
2 | AIR FILTER ELEMENT 31HP |
| 237282 |
3 | DUST BOOT |
| 237283 |
37
