Norton Abrasives C6136, C3120 Oil Specifications, Oil Quality Grade, Approved Oils, Deutz, Acea

Oil Specifications:
Oil Type (Shipped from factory):	SAE 20W20
Oil Change Quantity with Filter:	8.45 qt (8 liters)
Oil Quality Grade:

Lube Oils are differentiated by Deutz according to their performance and quality class. Oils of other comparable specifications can be used. If you have any questions please contact your local Deutz service center.

Approved Oils:

Deutz	DQC I	DQC II	DQC III
ACEA	CF/CF-4	CG-4/CH-4	-NA-
API	CF/CF-4	CG-4/CH-4	-NA-
DHD	-NA-	DHD-1	-NA-

See the Deutz Operation Manual or contact your local Deutz Service Center for more information.

Oil Viscosity:

In general multi-viscosity oils should be used. The viscosity of oil to be used is dependent on the ambient temperature of the environment that the engine will be operating in. Use the table to the left to determine the SAE grade based on ambient environment temperatures. If the ambient temperature is lower than the limits of the SAE grade selected the cold starting performance of the engine will be affected. Do not exceed the temperature application limits for the SAE grade selected for extended periods of time. For more information see the Deutz Operation Manual or contact your local Deutz Service Center.

32