Oil:

Checking the Oil ‡:

1.Fill oil into oil pan up to the “Max” mark on the Engine Dipstick. The Engine Dipstick is located on the rear of the Engine, between the Engine and the Console. Use either of the two (2) Oil Filler Necks one is located on top of the engine, the other is located on the rear of the Engine to add oil. If the oil level is only just above the “Min” mark, more oil must be added. See the figure below: Oil Filler Neck and Dipstick locations.

2.Start the engine and run at an idle speed for at least 2 minutes. For information on how to start the engine see section B. Engine subsection 5. Starting the Engine of this manual (pages 14 to 15).

3.Turn the Engine off

4.Turn the engine off.

5.Check the oil level using the Engine Dipstick

Oil Filler Neck

(Top of Engine)

Oil Filler Neck

(Rear of Engine)

Oil Dipstick

(Rear of Engine)

Oil Filler Neck and Dipstick Locations ‡

31

Page 31
Image 31
Norton Abrasives C3130, C3120, C6120, C3126, C6136, C6130 Oil Checking the Oil ‡, Oil Filler Neck and Dipstick Locations ‡