Symmetricom 1100, 1000 Outputs, Parameter Specification T1 Signals, E1 Signals, JCC Signals

Chapter 7 Specifications of the TimeProvider

Outputs

Outputs

The TimeProvider supports up to 32 outputs. The optional Expansion Panel provides an additional 32 outputs. You can provision the outputs in groups of eight.

Sync Status Messages: Compliant with SSM specification ITU-T G.704, T1X1.3 TR33, ANSI T1.101-1999, and Telcordia GR-253-CORE

Table 7-5. Output Signal Specifications

Parameter

Specification

	T1 Signals
Framing (user selectable)	D4/Super Frame (SF)
	Extended Super Frame (ESF)
Signal Waveshape	Framed, all ones, Alternate Mark Inversion (AMI) per (ANSI)
	T1.102 and ITU Rec. G.703
Pulse Amplitude	2.4 to 3.6 volts peak into 100 V
Output Jitter	< 0.03 UI
Termination Impedance	100 Ω ± 5% balanced
	E1 Signals
Framing (user selectable)	CAS, CCS
Signal Waveshape	Framed, all ones, Alternate Mark Inversion (AMI)
	Per ITU Rec. G.703 Sec. 9
Pulse Amplitude	2.4 to 3.6 volts peak into 120 Ω
	1.9 to 2.8 volts peak into 75 Ω
Output Jitter	< 0.03 UI
Termination Impedance	120 Ω ± 5% balanced; 75 Ω ± 5% unbalanced
	CC Signals
Amplitude	2.7 to 3.3 Vp
Waveform	Bipolar RTZ; all 1s with BPV every eighth pulse
Termination Impedance	133 Ω ± 5% balanced
	JCC Signals
Amplitude	1.0 Vp ±0.1 V
Termination Impedance	110 Ω

198 TimeProvider User’s Guide 097-58001-02 Revision G – April 2008