Symmetricom 1000, 1100 manual Creating a Connection, Create New Connection Window

Chapter 4 Provisioning the TimeProvider

Using SynCraft

Creating a Connection

To create a connection to the TimeProvider, select Connection, New Connection. The Create New Connection window appears, as shown in Figure 4-2.

Figure 4-2. The Create New Connection Window

Fill in each field as appropriate for your installation, then click Save.

Name – the name of the connection as used by SynCraft Type – select TimeProvider from the drop-down list SiD – enter the Source ID for the unit

Username – enter a user name in the TimeProvider’s userid list

Password – enter the password for the user. If this is the first log-in attempt, the user level is automatically defined to be at the Security level.

Type – select TCP/IP for use with an Ethernet connection IP address – enter the unit’s IP address

Port – enter 5000 for use with an Ethernet connection

097-58001-02 Revision G – April 2008 TimeProvider User’s Guide 103