Porter-Cable PCB370SS instruction manual Table of Contents, Product Specifications

	TABLE OF CONTENTS
SECTION			PAGE
PRODUCT SPECIFICATIONS	.....................................................................................................................		2
CALIFORNIA PROPOSITION 65			3
SAFETY GUIDELINES - DEFINITIONS			3
GENERAL SAFETY RULES			4
SCROLL SAW SAFETY			5
ELECTRICAL REQUIREMENTS AND SAFETY			7
TOOLS NEEDED FOR ASSEMBLY			8
CARTON CONTENTS			8
UNPACKING YOUR SCROLL SAW			9
KNOW YOUR SCROLL SAW			10
GLOSSARY OF TERMS			11
ASSEMBLY AND ADJUSTMENTS			12
OPERATION			17
MAINTENANCE			21
ACCESSORIES AND ATTACHMENTS			22
TROUBLESHOOTING GUIDE			23
PARTS LIST			24
WARRANTY			28
PRODUCT SPECIFICATIONS
MOTOR		TABLE
Power Source…………	120 V AC, 60 HZ, 1.6 Amp	Size	12-43/64 in. x 18-1/2 in.
Speed.................…………	500-1500 RPM		(322 mm × 470 mm)
Speed Control.………	Electric	Tilt	45° Left ; Right
BLADE		SAWDUST BLOWER	Yes
Type…..........………………….	Pin-end or Plain-end	WORK LIGHT	10 W (maximum)
Depth of Throat	16-1/16 in. (408 mm)
Blade Stroke…......…	11/16 in. (17.5 mm)
Depth of 45° Cut……………....	1-1/16 in. (27 mm) Right ;
	3/4 in. (19 mm) Left
Depth of 90° Cut	2 in. (50.8 mm)

!WARNING

To avoid electrical hazards, fire hazards or damage to the tool, use proper circuit protection. Use a separate electrical circuit for your tools.

The scroll saw is wired at the factory for 110-120 Volt operation. It must be connected to a 120V,1.6 AMP branch circuit and use a 1.6 AMP time delay fuse or circuit breaker. To avoid shock or fire, replace power cord immediately if it is worn, cut or damaged in any way.

2009/10 2 Printed in China