![1.The appliance must be switched off.](/images/new-backgrounds/180449/18044921x1.webp)
| Operating Instructions |
1 | The hardness range cannot be set if a programme is running. If you |
| have inadvertently started a programme (an LED indicator is constantly |
illuminated) the programme must be cancelled by pressing the appro- priate button.
1.The appliance must be switched off.
2.Press the water softener button and the function button simultane- ously and hold them down.
3.In addition press the ON/OFF button.
4.At first the LED indicator for the water softener button will light up continuously for 5 seconds and then begin to flash.
–The number of flashes corresponds to the hardness setting.
–The sequence of flashes is repeated several times after a 5 second pause.
5.Each time you press the water softener button the hardness setting will go up by 1.
(Exception: Hardness setting 1 follows after hardness setting 5.)
6.If the hardness setting is changed, the LED indicator for the water sof- tener button will confirm the change by staying alight continuously for 5 seconds and then flashing again.
7.The number of flashes corresponds to the new hardness setting.
8.The sequence of flashes is repeated several times after a 5 second pause.
9.Once the hardness setting is correct, press the ON/OFF switch. The hardness setting is then saved.
11