IBM x Series 200 Installing an adapter, Expansion slot cover Adapter retaining bracket Adapter

Installing an adapter

Expansion slot cover

Adapter retaining bracket

Adapter

Adapter support bracket

Complete the following steps to install an adapter:

Attention: When you handle ESD-sensitive devices, take precautions to avoid damage from static electricity. For details on handling these devices, see “Handling static-sensitive devices” on page 39.

1.Review the information in “Before you begin” on page 38.

2.Turn off the server and peripheral devices and disconnect all external cables and power cords; then, remove the side cover. See “Removing the side cover” on page 40 for details.

3.Determine which PCI expansion slot you will use for the adapter.

Note: Check the instructions that come with the adapter for any requirements, restrictions, or cabling instructions. It might be easier for you to route any cables before you install the adapter.

4.If you are installing a full-length adapter, rotate the front adapter support bracket to the open (unlocked) position.

5.Rotate the rear adapter retaining bracket to the open (unlocked) position; then place it over the rear of the server.

6.Remove the PCI expansion-slot cover. From the rear of the server, press in on the slot cover. Grasp it and pull it out of the slot. Store it in a safe place for future use.

Attention: PCI expansion-slot covers must be installed on all vacant slots. This maintains the electromagnetic emissions characteristics of the server and ensures proper cooling of server components.

7.Remove the adapter from the static-protective package. Avoid touching the components and gold-edge connectors on the adapter.

Installing options 45