IBM x Series 200 manual NDIS 4.0 Windows NT driver messages

Models: x Series 200

1 152
Download 152 pages 50.59 Kb
Page 31
Image 31

Message

 

Description

 

 

Error identifying slot

Explanation: The mapping between the board name entered

numbers for the specified

and the slot number for an adapter could not be established.

board names.

Action: Check the board name for the adapter before issuing

 

the bind command. If the problem persists, contact your

 

network supplier.

 

 

Can’t unbind specified slot

Explanation: The number entered in the unbind command

from AFT group. Make sure

was not the primary adapter in an AFT group.

that the slot you specified is

Action: Reissue the unbind command and specify the slot

for the primary adapter in an

number for the primary adapter.

AFT group.

 

 

 

 

LAN adapter at slot nnnn

Explanation: The adapter that you specified could not be

(Port 0xaa) failed to reset.

initialized.

Check the state of the

Action:

adapter.

1.

Load the driver for the supported adapter.

 

 

2.

Check that the adapter is seated properly in the slot and

 

 

try loading the AFT module again.

 

If the problem persists, contact your network supplier.

 

 

AFT is not supported on this

Explanation: The NetWare on your server is not a version

version of NetWare™.

supported by AFT.

 

Action: Load and bind AFT only on supported versions of

 

NetWare (currently version 4.11 and above).

 

 

Failed to allocate resources

Explanation: An unknown error has occurred when trying to

tags.

allocate needed resources for the AFT module.

 

Action: Check server configuration. If the problem persists,

 

contact your network supplier.

 

 

Please unload all LAN

Explanation: An attempt was made to unload the AFT.NLM

drivers before unloading

module before unloading the adapter driver.

AFT.NLM.

Action: Unload the adapter driver before unloading the AFT

 

module.

 

 

 

Table 4. NetWare driver messages for the Ethernet controller.

NDIS 4.0 (Windows NT) driver messages

This section contains the error messages for the NDIS 4.0 drivers. The explanation and recommended action are included with each message.

Diagnostics 23

Page 31
Image 31
IBM x Series 200 manual NDIS 4.0 Windows NT driver messages, NetWare driver messages for the Ethernet controller