IBM x Series 200 manual Mouse port, Keyboard port, Mouse connector pin-number assignments

Mouse port

The system board has one mouse port that supports a mouse or other pointing device. The mouse connector is located on the rear of your server, see “I/O connector locations” on page 60 for its location.

65

43

2 1

Table 7. Mouse connector pin-number assignments .

Pin	Signal
1	Data
2	Not connected
3	Ground
4	+5 V dc
5	Clock
6	Not connected

Keyboard port

There is one keyboard port on the rear of your server, see “I/O connector locations” on page 60 for its location.

Note: If you attach a standard (non-USB) keyboard to the keyboard connector, the USB ports and devices will be disabled during the power-on self-test.

65

43

2 1

Table 8. Keyboard connector pin-number assignments .

Pin	I/O	Signal
1	I/O	Data
2	N/A	Reserved
3	N/A	Ground
4	N/A	+5 V dc
5	I/O	Keyboard clock
6	N/A	Reserved

62Hardware Maintenance Manual: xSeries 200