IBM x Series 200 manual Features and Specifications

Server features

Table 1. Features and Specifications.

Microprocessor: Supports one		Power supply:
microprocessor (depending on your		One 330 watt (90-240 V ac)
model)
• Intel® Pentium® III with 256 KB		Video:
	Level-2 cache and MMX™
		•	S3 Savage 4 AGP video adapter
	(MMX2) technology
	or	• Compatible with SVGA and
			VGA
• Intel® Celeron® with 128 KB
		• 8 MB SDRAM video memory
	Level-2 cache and MMX™
	(MMX2) technology	Size:
Memory:		•	Height: 470 mm (18.5 in.)
•	Minimum: 64 MB	•	Depth: 508 mm (19.9 in.)
•	Maximum: 1.5 GB	•	Width: 165 mm (6.5 in.)
• Type: PC133 MHz, ECC SDRAM,		•	Weight: approximately 19.5 Kg
	unregistered DIMMs only		(43 lb.) when fully configured or
• Slots: 3 dual inline			15.9 Kg (35 lb.) minimum
Drives: (depending on your model)		Integrated functions:
•	Diskette: 1.44 MB	•	10BASE-T/100BASE-TX
			Ethernet controller on the
• CD-ROM: IDE
			system board
•	Hard disk drive	•	Two serial ports
•	Tape drive	•	One parallel port
Expansion bays:		•	Two USB ports
• Two 5.25-in. bays (one CD-ROM		•	Keyboard port
	drive installed)	•	Mouse port
• Two 3.5-in. bays (one diskette		•	MIDI port
	drive installed)	•	Audio ports
• Three 3.5-in. slim-high bays			— Line out
	available
			— Line in
PCI expansion slots:			— Mic
• Three 33 MHz/32-bit on the		•	Dual-channel bus mastering
	system board (some models come		IDE controller
	with a SCSI adapter installed)
• Two 33 MHz/32-bit on the PCI		Acoustical noise emissions:
	Bus extender board	•	Sound power, idling: 6.6 bel
AGP slot: Accelerated graphics port			maximum
		•	Sound power, operating: 6.8 bel
(AGP)
			maximum

Environment:

•Air temperature:

—Server on: 10° to 35° C (50.0°

to 95.0° F). Altitude: 0 to 914 m (2998.7 ft.)

—Server on: 10° to 32° C (50.0°

to 89.6° F). Altitude: 914 m (2998.7 ft.) to 2133 m (6998.0 ft.)

—Server off: 10° to 43° C (50.0° to 109.4° F). Maximum altitude: 2133 m (6998.0 ft.)

•Humidity:

—Server on: 8% to 80%

—Server off: 8% to 80%

Heat output:

Approximate heat output in British Thermal Units (Btu) per hour

•Minimum configuration: 341 Btu (100 watts)

•Maximum configuration: 1604 Btu (470 watts)

Electrical input:

•Sine-wave input (50-60 Hz) required

•Input voltage low range:

—Minimum: 90 V ac

—Maximum: 137 V ac

•Input voltage high range:

—Minimum: 180 V ac

—Maximum: 265 V ac

•Input kilovolt-amperes (kVA) approximately:

—Minimum: 0.08 kVA

—Maximum: 0.52 kVA

The design of the 200 takes advantage of advancements in data storage and memory management. The server combines:

•Impressive performance using an innovative approach to microprocessor utilization

The server comes with one Celeron® or Pentium® III microprocessor installed.

4Hardware Maintenance Manual: xSeries 200