You can enable a
•Frequency Control
Select this choice to enable or disable the
•Date and Time
Select this choice to set the system date and time.
The system time is in a
Note: You may also set the date and time using the procedures provided on the ServerGuide CDs.
•System Security
Select this choice to set a
•Advanced Setup
Select this choice to change values for advanced hardware features, such as Cache Control and PCI configuration.
A message appears above the choices on this menu to alert you that the system might malfunction if these options are configured incorrectly. Follow the instructions on the screen carefully.
—Cache Control
Select this choice to enable or disable the microprocessor cache.
Attention: Do not make changes to the Cache Control unless directed to do so by an IBM authorized service representative.
—ROM Shadowing
Select this choice to enable or disable the state of a ROM shadowing.
—Chipset Feature
Select this choice to modify settings that control features of the core chip set on the system board.
Attention: Do not make changes to the Chipset Feature unless directed to do so by IBM.
—Memory Settings
If a memory error is detected during POST or memory configuration, the server can automatically disable the failing memory bank and continue operating with reduced memory capacity. If this occurs, you must manually enable the memory bank after the problem is corrected. Select Memory Settings from the Advanced Setup menu, use the arrow keys to highlight the bank that you want to enable; then, use the arrow keys to select Enable.
•Power Management Setup
Select this choice to enable or disable system power savings.
•Save and Exit Setup
Select this choice to save the customized settings.
•Load Optimized Defaults
Select this choice to discard changes and restore the factory settings.
•Exit Without Saving
Select this choice if you want to exit without saving changes, or if no changes have been made.
Configuring the server 31
