IBM x Series 200 manual Installing a security U-bolt, Hardware Maintenance Manual xSeries

the location of the fan cable connector. See “Installing the cover” on page 59 for instructions on installing the cover.

8.Reconnect the external cables and power cords; then, turn on the peripheral devices and the server.

Installing a security U-bolt

To help prevent hardware theft, you can add a security U-bolt and cable to your server. After you add the security cable, make sure that it does not interfere with other cables that are connected to the server.

Complete the following steps to install a U-bolt:

1.Review the safety precautions listed in “Safety information” on page 105.

2.Turn off the server and peripheral devices and disconnect all external cables and power cords; then, remove the cover (see “Removing the side cover” on page 40 for details).

3.Use a screwdriver to remove the two metal knockouts.

4.Insert the U-bolt through the rear panel; then, attach and tighten the nuts.

5.If you have other options to install or remove, do so now.

6.Replace the side cover, see “Installing the cover” on page 59.

7.Thread the cable through the U-bolt and around an object that is a part of or permanently secured to the building structure or foundation, and from which it cannot be removed; then, fasten the cable ends together with a lock.

58Hardware Maintenance Manual: xSeries 200