To remove the bezel release latch, do the following:
1.
2.Unplug the server.
3.Remove the cover (see “Removing the side cover” on page 40).
4.Remove the front bezel (see “Removing the bezel” on page 41).
5.Remove the handle assembly (see “Handle assembly” on page 81).
6.Remove the top/side cover (see “Top/side cover”).
7.Press down on the tab.
8.From the underside, grasp the bezel release latch in the center and gently pull it back and away from the server.
Top/side cover
Before you begin:
•Read “Safety information” on page 105.
•Review the information in “Before you begin” on page 38.
