IBM x Series 200 manual Error Code/Symptom

Error Code/Symptom			FRU/Action
201-XXX-999		1.	See error text for failing DIMMs
(Multiple DIMM failure, see
error text.)
202-XXX-001		1.	Microprocessor CPU 1
(Failed System Cache test)
206-XXX-000		1.	Cable
(Failed Diskette Drive test)		2.	Diskette Drive
		3.	System Board
215-XXX-000		1.	CD-ROM Drive Cables
(Failed IDE CD-ROM test)		2. CD-ROM Drive
		3.	System Board
217-XXX-000		1.	Fixed Disk 1
(Failed BIOS Fixed Disk test)
Note:	If RAID is
	configured, the fixed
	disk number refers to
	the RAID logical
	array.
217-XXX-001		1.	Fixed Disk 2
(Failed BIOS Fixed Disk test)
Note:	If RAID is
	configured, the fixed
	disk number refers to
	the RAID logical
	array.
217-XXX-002		1.	Fixed Disk 3
(Failed BIOS Fixed Disk test)
Note:	If RAID is
	configured, the fixed
	disk number refers to
	the RAID logical
	array.
264-XXX-0NN		1.	Tape Cartridge, if user executed the Read/Write Tape Drive test (XXX = 256)
(NN = SCSI ID of failing Tape		2.	SCSI or power cable connected to the tape drive with SCSI ID NN
Drive)		3.	Tape drive with SCSI ID NN – refer to Help and Service Information appendix of
			tape drive’s User Guide.
		4.	I/O Legacy Board or SCSI Controller – run SCSI Controller diagnostic to
			determine of SCSI bus is functioning properly.
264-XXX-999		1.	See error messages/text in the PC Doctor error log for detailed information on
(Errors on multiple tape			each individual tape drive error.
drives, see error text for more
info)

Symptom-to-FRU index 91