Electrolux FAVORIT 44080 i instruction

Programme buttons

End of cycle indicator

Programme progress display

1 2 3

Set delay timer

Function buttons	Select	Control
	3 in1 function	indicators

The Programme buttons are used to select the desired dishwashing cy- cle.

Function buttons: In addition to the pre-set dishwashing cycle, the following functions can also be set using these buttons:

Function button 1

Sets the water softener

Function button 2

- not programmed -

Function button 3

- not programmed -

Programme progress display: The current stage of the programme is always shown in the programme progress display.

The control indicators have the following meanings:

1)	Refill with dishwasher salt
	Refill with dishwasher salt
1)	Refill with rinse aid
	Refill with rinse aid

1) These control indicators are never illuminated while a dishwashing cycle is running.

6

Image 6

Electrolux FAVORIT 44080 i manual Control indicators have the following meanings

Contents

Favorit 44080 Following symbols are used in the text Dear Customer Contents Child Safety SafetyPrior to using for the first time General Safety Diagram of Appliance Control Panel Control indicators have the following meanings Setting manually Prior to Using for the First TimeSetting the Water Softener Setting electronically Setting Only when using the dishwasher for the first time Adding dishwasher Salt Filling Up with Rinse Aid Setting the Amount of Rinse Aid Required Daily use Loading cutlery and dishes Loading cutlery Pots, Pans, Large Plates Cups, Glasses, Coffee Service Adjusting the Height of the Upper Basket Adding DetergentRaising / Lowering the upper bas- ket Concentrated detergents Detergent tablets If you do not want to use 3in1 products any more Using 3in1 detergentsIf you want to use 3in1 products If you want to use 4in1 products Selecting the dishwashing cycle Cycle Table Suitable Type Selecting a programme Cancelling the wash programme Interrupting or Cancelling a dishwashing cycleSetting the Delay Timer Starting a Dishwashing Cycle Cancelling the delay timer Switching Off the dishwasherTo change the time delay Removing the Dishes Care and cleaning Cleaning the filters Cleaning the spray arm jets Upper basket spray arm Bottom spray arm What to do if Remedying small malfunctions Indicator for the end Dishwashing cycle is Dishes do not dry and are not shining If the Dishwashing Results are not SatisfactoryDishes are still dirty There are dried water drops on the glasses and dishes Disposal Packaging materialOld appliance Technical Data Example loading arrangements Full load Half loadPage Installation and connection instructions Safety Information for the Installation Installing the Dishwasher Dishwashers That Can be Integrated Connecting the inlet hose Connecting the dishwasherConnecting to the water supply Permitted water pressure Water drainage Anti-flood system Electrical Connection Changing a fuseGreen and Yellow Earth BlueNeutral BrownLive Connecting systems Warranty conditions Great Britain 0870 5 929 Customer Care For general enquiries concerning AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG