Electrolux FAVORIT 44080 i instruction

Setting the Amount of Rinse Aid Required

3 Only change the amount dispensed, if smears, milky spots (reduce the amount) or dried on water spots (increase the amount) can be seen on glasses and dishes. (See section “If dishwashing results are not satisfac- tory”.) The dosage can be set from 1-6. The dosage is pre-set to “4” in the factory.

1.Open the dishwasher door.

2.Press the release button on the rinse

aid compartment.

3. Open the cover.

4.Set the dosage level.

5. Press the lid shut until it clicks into place.

6. If rinse aid has leaked out, wipe it away with a cloth.

11

Image 11

Electrolux FAVORIT 44080 i manual Setting the Amount of Rinse Aid Required

Contents

Favorit 44080 Dear Customer Following symbols are used in the text Contents General Safety SafetyPrior to using for the first time Child Safety Control Panel Diagram of Appliance Control indicators have the following meanings Setting electronically Prior to Using for the First TimeSetting the Water Softener Setting manually Setting Adding dishwasher Salt Only when using the dishwasher for the first time Filling Up with Rinse Aid Setting the Amount of Rinse Aid Required Loading cutlery and dishes Daily use Pots, Pans, Large Plates Loading cutlery Cups, Glasses, Coffee Service Raising / Lowering the upper bas- ket Adjusting the Height of the Upper BasketAdding Detergent Detergent tablets Concentrated detergents If you want to use 4in1 products Using 3in1 detergentsIf you want to use 3in1 products If you do not want to use 3in1 products any more Suitable Type Selecting the dishwashing cycle Cycle Table Selecting a programme Starting a Dishwashing Cycle Interrupting or Cancelling a dishwashing cycleSetting the Delay Timer Cancelling the wash programme Removing the Dishes Switching Off the dishwasherTo change the time delay Cancelling the delay timer Cleaning the filters Care and cleaning Upper basket spray arm Cleaning the spray arm jets Bottom spray arm Remedying small malfunctions What to do if Indicator for the end Dishwashing cycle is There are dried water drops on the glasses and dishes If the Dishwashing Results are not SatisfactoryDishes are still dirty Dishes do not dry and are not shining Old appliance DisposalPackaging material Technical Data Full load Half load Example loading arrangementsPage Safety Information for the Installation Installation and connection instructions Dishwashers That Can be Integrated Installing the Dishwasher Permitted water pressure Connecting the dishwasherConnecting to the water supply Connecting the inlet hose Anti-flood system Water drainage Green and Yellow Earth BlueNeutral BrownLive Electrical ConnectionChanging a fuse Connecting systems Great Britain Warranty conditions Customer Care For general enquiries concerning 0870 5 929 AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG