10electrolux

Closing the door

1. Clean the door gaskets.

2. If necessary, adjust the door. Refer to "In- stallation".

3. If necessary, replace the defective door gaskets. Contact the Service Center.

Technical data

Dimension of the recess

Height

Width

Depth

Rising Time

The technical information are situated in the rating plate on the internal left side of the ap- pliance and in the energy label.

1780 mm

560mm

550mm

20h

Installation

Read the "Safety Information" carefully for your safety and correct operation of the appliance before installing the appliance.

Positioning

Install this appliance at a location where the ambient temperature corresponds to the cli- mate class indicated on the rating plate of the appliance:

Climate

 

Ambient temperature

class

 

 

SN

 

+10°C to + 32°C

N

 

+16°C to + 32°C

ST

 

+16°C to + 38°C

 

 

 

Electrical connection

Before plugging in, ensure that the voltage and frequency shown on the rating plate cor- respond to your domestic power supply. The appliance must be earthed. The power supply cable plug is provided with a contact for this purpose. If the domestic power sup- ply socket is not earthed, connect the appli- ance to a separate earth in compliance with current regulations, consulting a qualified electrician.

The manufacturer declines all responsibility if the above safety precautions are not ob- served.

This appliance complies with the E.E.C. Di- rectives.

T

+16°C to + 43°C

Page 10
Image 10
Electrolux FI22/10SA, FI22/10FA Technical data, Installation, Closing the door, Positioning, Electrical connection