Electrolux FI22/10SA, FI22/10FA user manual What to do if…, Periods of non-operation

Models: FI22/10FA FI22/10SA

1 16
Download 16 pages 52.1 Kb
Page 8
Image 8
Periods of non-operation

8electrolux

4.When defrosting is completed, dry the in- terior thoroughly and keep the scraper for future use.

5.Switch on the appliance.

6.After two or three hours, reload the pre- viously removed food into the compart- ment.

•disconnect the appliance from elec- tricity supply Warning! Never use sharp metal tools to scrape off frost from the evaporator as you could damage it.

Do not use a mechanical device or any artificial means to speed up the thawing process other than those recommended by the manufacturer.

A temperature rise of the frozen food packs, during defrosting, may shorten their safe storage life.

Periods of non-operation

When the appliance is not in use for long pe- riods, take the following precautions:

disconnect the appliance from elec- tricity supply

remove all food

defrost 4)and clean the appliance and all accessories

leave the door/doors ajar to prevent un- pleasant smells.

If the cabinet will be kept on, ask somebody to check it once in a while to prevent the food inside from spoiling in case of a power failure.

What to do if…

What to do if… Warning! Before troubleshooting, disconnect the mains plug from the mains socket.

Only a qualified electrician or competent person must do the troubleshooting that is not in this manual.

Important! There are some sounds during normal use (compressor, refrigerant circulation).

Problem

The appliance does not operate. The lamp does not operate.

The lamp does not work.

The compressor operates continually.

Possible cause

The appliance is switched off.

The mains plug is not connected to the mains socket correctly.

The appliance has no power. There is no voltage in the mains socket.

The lamp is in stand-by.

The lamp is defective.

The temperature is not set cor- rectly.

The door is not closed correctly.

The door has been opened too frequently.

Solution

Switch on the appliance.

Connect the mains plug to the mains socket correctly.

Connect a different electrical appli- ance to the mains socket. Contact a qualified electrician.

Close and open the door.

Refer to "Replacing the lamp".

Set a higher temperature.

Refer to "Closing the door".

Do not keep the door open longer than necessary.

4) If foreseen.

Page 8
Image 8
Electrolux FI22/10SA What to do if…, Periods of non-operation, disconnect the appliance from elec- tricity supply