Electrolux IH 18, IH24, IH21 manual Electrical connection terminal 3 factory-prefitted

Electrical connection

The electrical connection should only ever be made after the water is connected! The appliance is only suitable for a fixed connection of 380 V 3 ~ (three-phase current) .

The appliance must be connected to the protective conductor.

Important note: The wiring must be arranged so that the appliance can be de-energised (disconnected from the electricity supply) before any intervention involving the fuses being unscrewed, the automatic safety devices being switched off, or similar measures being taken (isolating gap width of at least 3 mm).

Mains connection lead
			The connection cable must project from the wall
	20		over an insulated length of at least 20 mm.
		150
Mains connection on top

1 4

max.10

2 3

Electrical connection terminal (3) factory-prefitted.

Cut out cable inlet opening (1). Slide flexible inlet bush (2) over connection cable, insert it through the back wall opening, and screw fixing strap under connection terminal (4).

13