Electrolux IH21, IH24, IH 18 manual Installation versions

Installation versions

For fittings directly on the appliance, the bushing openings pre-embossed in the appliance hood must be cut out for the extension pipes of the fitting. The supporting sheet (1) enclosed with the fitting fixes the extension pipes in position and seals the housing openings. To ensure moisture protection, the supporting sheet must be fitted.

2

	Fitting must be vertically seated and
1	centrally under the appliance. Seal
	appliance connection to the wall, where
	necessary, with G 1/2 A blind plugs (2)
	(fitting accessory).
3	If a cold water supply is made to the
4
	appliance, the shutoff adapter (3) should be
	replaced by an adapter with a wood screw
	(4) for fixing the fitting in place.

The following tapping fittings are suitable:

D 169 - Special mixer tap with swivelling outlet D 159 - Special shower mixer tap

D 149 - Special bath mixer tap with change-over tub/shower

Important! After completion of the water installation, the appliance should be thoroughly flushed with cold water (open the hot water valve). The strainer insert may possibly need cleaning afterwards.

11