Important instructions for the user
General
-Installation and startup should only ever be performed by an approved installer or authorised installation firm.
-Before using the appliance, please read through these instructions carefully. The manufacturer cannot accept any liability for damage resulting from failure to follow these instructions.
-Fittings and connecting pipes may get hot. Therefore keep children well away.
Operating the appliance
The ELECTROLUX IH electronic instantaneous water heater heats the water as the latter continuously flows through it. When the hot water tap is opened, the appliance switches on at a flowrate of around 3 l/min. When the hot water valve is closed or if the flowrate is reduced below 2.5 l/min, the appliance switches itself off again. The appliance is suitable for household use and should only ever be used for heating of drinking water.
One or more tapping points can be supplied with hot water.
Temperature preselection
The electronic system allows continuous temperature selection in the range from 30°C to 60°C.
Recommendation for
40°C for washbasin, shower, and bath (knob tangibly engages).
55°C for kitchen sink. If this temperature is no longer needed, the appliance should be reset to the 40°C energy-
saving level.
Wash basin
Shower
Bath basin
Kitchen sink
When the appliance is operated with a thermostatic mixer tap, the temperature setting on the instantaneous water heater must be around 8°C higher than on the thermostatic mixer tap.
3
