An additional midpoint location bracket may be fitted to the appli- ance (as shown) to assist retention of the housing side wall.
Drill the unit using a ³ 2,5 mm drill (10 mm max. penetration.
Fix the square fitting (1) to the appli- ance.
Ø 2,5 |
13mm |
D740 |
Fit the appliance in the niche by making sure that it stands against the interior surface of the unit on the side where the door hinges of the appliances are fitted. Insert the appliance until the upper strip butts up against the unit (1) and make sure that the lower hinge is in line with the surface of the unit (2).
Fasten the appliance with 4 screws provided in the kit included with the appliance. (I = 3,5 x 13) - (P = 3,5 x 22).
2 |
D023 |
I |
P |
20