Inner door reversal
1.Using a screwdriver release bracket
(1)by pressing on the internal spring and withdraw it from its seat together with the door; remove plug
(2)and fit it in the hole left open on the opposite side; turn the door through 180°, remove the bracket (1) and refit it on the opposite side.
2.Refit the door and insert the top pin and bottom bracket (1), pushing it into place.
180° |
2 |
1 |
PR14 |
To ensure correct storage of food, the door is fitted with a simple spring device which holds it in the open position until it is properly closed.
Instructions for building-in
Apply joint the sealing strip as shown in figure.
D765 |
19
