Manuals / Electrolux / Kitchen Appliance / Freezer

Electrolux K 7 18 40-4i Fix cover Hc on guide Ha until it clips into place, Hb Hd, PR167/1

Models: K 7 18 40-4i

1 24

Download 24 pages 26 Kb

Page 22

Fix cover (Hc) on guide (Ha) until it clips into place.

Fix cover (Hc) on guide (Ha) until it clips into place.

Ha

Hc

Open the appliance door and the fur- niture door at 90°. Insert the small square (Hb) into guide (Ha). Put together the appliance door and the furniture door and mark the holes as indicated in the figure.

Hb

Hd

PR167/1

Remove the brackets and mark a dis- tance of 8 mm from the outer edge of the door where the nail must be fitted (K).

8mm

K

Ha

22

Image 22

Electrolux K 7 18 40-4i installation instructions Fix cover Hc on guide Ha until it clips into place, Hb Hd, PR167/1

Contents

Integrated Fridge Freezer Operating and Installation Instructions SANTO K 7 18Dear customer Service and Spare Parts Guarantee Conditions ContentsSafety Regulations, Standards, GuidelinesIntended use SafetySafety of children Prior to initial start-upDaily Operation ServiceDisposal Appliance Packaging InformationDisposal of old Appliances Remove transport packagingShelf holders Starting up and temperature regulation Setting “0” OffFresh food refrigeration Interior AccessoriesFor safety, store in this way only one or two days at the most Storage ShelvesFreezing and storing frozen food Refrigerator Preparation of Ice CubesDefrosting FreezerCleaning and Care Switching off the applianceIf the appliance is not going to be used for an extended period Energy Saving Tips Possible Cause Something Not WorkingSymptom RemedyChanging the light bulb 0870 5 Service and Spare PartsCustomer Care Department Guarantee Conditions Guarantee ConditionsEuropean Guarantee Electrical Connection InstallationWARNING - THIS APPLIANCE MUST BE EARTHED Your appliance needs air Housing dimensionsPositioning Reversing the doorInstructions for building-in Inner door reversalApply joint the sealing strip as shown in figure Drill the unit using a ³ 2,5 mm drill 10 mm max. penetration Snap ventilation grille B and hinge cover E into position Apply covers C-D into the relevant holesSeparate parts Ha,Hb, Hc, Hd as shown in the figure Hb Hd Fix cover Hc on guide Ha until it clips into placePR167/1 Regulations, Standards, Guidelines 2222 06/04