The control panel
1 2 3 4 5
1. On/Off indicator light
This light comes on when the On/Off pushbutton is depressed, indicating that the machine is on.
2. On/Off pushbutton
Press this button to preset the dishwasher to accept settings (selection of a wash programme, economy drying, etc.).
The number "3" appears in the digital display.
When the washing programme has finished, the machine stops automatically and the On/Off indicator light remains on. To switch the indicator light off press the On/Off pushbutton.
3. Indicator lights
Open door
Flashes when the has not been properly closed.
Salt
Flashes when the salt has run out, to remind you to refill the salt container.
Water tap
Flashes when:
-The water tap is closed.
-The mains water supply has been cut off.
-The inlet hose may be blocked.
Rinse aid
Flashes when the rinse aid has run out, to remind you to refill the rinse aid dispenser.
6 | 7 8 9 | 10 |
4.Programme selection pushbutton
To select a programme press this button until you see the number of the programme you wish to select in the digital display (see chart "washing programmes"). All the indicator lights of the phases corresponding to the selected programme will come on.
5. Half load pushbutton
By pressing this button, washing can be confined to one basket instead of both.
The indicator light corresponding to the basket selected comes on (upper or lower).
This is very useful and economical when only a few dishes need washing.
Remember to load all the dishes into the basket selected.
If both indicator lights are out, washing will be carried out in both baskets.
5 | PCP17UK |