Operating sequence
1. Check the filters
Ensure they are clean and properly positioned (see cleaning instructions).
2.Press the On/Off pushbutton3.Check that there is rinse
aid and salt
The indicator lights will flash if refilling is necessary.
9. Set the programme
Press the programme selector button until the number corresponding to the required programme appears in the display.
The indicator lights of the phases will remain on until the programme starts.
The following options may also be selected:
Half load by pressing the corresponding button.
Eco drying by pressing the corresponding button.
Delay start by pressing the corresponding button until the required number of hours delay is setted.
4. Load the dishes
Remove any scraps of food.
Pull the lower basket out and arrange the saucepans, plates and cutlery in it.
Pull the upper basket out and arrange the plates, saucers, glasses and cups etc. in it.
Slide the basket back into the machine.
5.Ensure that the spray arms can rotate freely.6.Measure out detergent
Add the required amount of detergent into the dispenser according to the "Washing programmes" chart and close the lid.
7.Close the detergent dispenser lid8.Close the dishwasher door
If a delay start has been selected, the dishwasher starts the countdown and the number of hours to go before the programme starts appears in the display.
Once the delay set has elapsed, the programme starts automatically.
When the programme starts all the phase indicator lights turn off except the phase under way.
If you wish to interrupt the wash programme at any time, press the On/Off pushbutton. To restart the machine, press this pushbutton again and the wash programme will resume at the point at which it was interrupted.
11. At the end of the washing programmeThe dishwasher will automatically stop and two zeros appear in the digital display.
All indicator lights turn off.
Only the On/Off indicator light remains on.
Depress the On/Off button to switch the dishwasher off.
Open the door.
18 | POS09UK |
