Adjusting the door balance
The door of the dishwasher is balanced when it is open in any position.
Fitting the decor panel may sometimes affect this balance. In this case it will be necessary to adjust the balance as follows:
By screwing or unscrewing these screws, the tension of the door balancing springs is increased or decreased respectively.
The weight of the panel should be within the limits given in "The furniture door" otherwise balancing the door will not be possible.
II08 |
Fixing to the adjacent units
To prevent the dishwasher tilting, it must be secured to either the worktop or adjacent kitchen cabinet/wall using the brackets supplied.
Insert the two fixing brackets into the slots provided in the top front part of the dishwasher as shown in the figure.
Secure the brackets to the adjacent units with the 3.5 x 16 screws using the upper or the side holes.
The appliance must be secured to the underside of the worktop using the brackets provided.
Failure to do this could cause damage or injury.
II54 |
32 | PFI23UK |
