Symptom | Solution |
The dishes are not clean (poor wash) | ■ The baskets are too full. |
| ■ The dishes have not been arranged properly. |
| ■ The spray arms do not rotate. |
| ■ The spray arms are clogged. |
| ■ The filters are clogged. |
| ■ The filters are not in position. |
| ■ Not enough detergent has been used or it is unsuitable. |
| ■ The detergent is old or has gone hard. |
| ■ The salt container cap is not properly closed. |
| ■ The washing programme selected is too gentle. |
|
|
Visible lime deposits or white film on | ■ The rinse aid has run out or too little is being used. |
the dishes | ■ Check that there is salt and that the salt cap is tight. |
| ■ Ensure the water softener has been adjusted to suit the water |
| hardness in your area. |
|
|
The dishes are not quite dry | ■ The dishes have been left too long inside the machine. |
|
|
Protection against flooding
The machine is fitted with a device to protect against flooding
-the device will operate if there are any water leaks in the machine, however it will only operate if the machine is on.
To repair the machine, call the Service Force Centre.
If after all these checks, the problem persists, contact your local Service Force Centre, quoting the model and serial number. This information can be found on the rating plate located on the right hand side of the dishwasher door (see picture).
Prod.No | Ser. No |
Mod |
|
RA01 |
|
23 | PSN11UK |
