Electrolux K 91200-4i manual Prior to Initial Start-Up, Starting Up and Temperature Regulation

Temperature Display

The temperature display can indicate several pieces of information.

•During normal operation, the temperature currently present in the refrigerator (ACTUAL temperature) is displayed.

•When the temperature is being adjusted, the temperature currently set flashes (DESIRED temperature).

Prior to Initial Start–Up

☞Please clean the appliance interior and all accessories prior to initial start-up (see section “Cleaning and Care”).

Starting Up and Temperature Regulation

☞1. Insert the plug into the plug socket. When the refrigerator compart- ment door is opened, the internal lighting is switched on.

2. Press ON/OFF button.

The green mains pilot indicator illuminates.

3. Press either the „+“ (WARMER) or „-“ (COLDER) button.

The temperature display switches over and the DESIRED temperature currently set flashes on the temperature display.

4. Set the required temperature by pressing the „+“ (WARMER) or „-“ (COLDER) buttons (see section "Temperature setting buttons"). The temperature display will immediately show the changed setting. With each further press of one of the two buttons, the DESIRED tempera- ture is adjusted by 1°C. Adjustable temperature range: +2°C to +8°C.

From a food safety point of view, +5 °C should be considered suffi- ciently cold for storing food in the fridge.

5. Once the required temperature has been set, after a short period (approx. 5 sec.) the temperature display will change and again indicate the current ACTUAL temperature inside the fridge. The display will change from flashing to continuous illumination.

12

The compressor will start and then run automatically.

Information! When the setting is changed, the compressor does not start immediately if automatic defrosting is currently taking place.

As the storage temperature within the fridge is reached quickly you can store food immediately after switching on.