What to do if ...
21
Symptom Possible Cause Remedy
Temperature cannot be set COOLMATIC function
switched on.
Switch off COOLMATIC
manually, or wait to set
the temperature until the
function has reset auto-
matically (refer also to
COOLMATIC section).
Water on the floor or on
storage shelves.
Water drain hole is
blocked.
See the “Cleaning and
Care” section.
Changing the Light Bulb
Warning! There is a risk of electric shocks! Before changing the light
bulb, switch off the appliance and unplug it, or disconnect from the
mains supply.
Light bulb data: 220-240 V, max. 25 W
☞1. To switch off, press the ON/OFF button until the mains power light
goes out.
2. Unplug the mains plug.
3. To change the light bulb, undo the
screw.
4. Press the light bulb cover as shown and
slide it towards the rear of the appli-
ance.
5. Change the faulty light bulb.
6. Refit the light bulb cover and the screw.
7. Switch the refrigerator back on.
The compressor does not
start immediately after
changing the temperature
setting.
This is normal, no error has
occurred.
The compressor starts after
a period of time.