Electrolux L 12720 VIT manual Mounting the door, Counter-magnet

c) Mounting the door

Fix the hinges (1) to the machine by means of the M5x8 screws (3-Fig. B). The hinges can be adjusted to compensate for possible uneven thick- ness of the door.

To align the door perfectly it is necessary to loosen the screw (3-Fig. B), adjust the door and tighten the screw again.

d) Counter-magnet (6)

The appliance is pre-arranged for a mag- netic closure of the door. To enable a cor- rect operation of this device, it is necessary to screw the counter-magnet (6) (steel disk

+rubber ring) into the inner side of the door.

Its position must correspond to the magnet

(4) on the appliance (see picture D).

D

If the door has to be opened from
left to right, invert the position of	4
the plates (7), the magnet (4) and
the plate (5) (Fig. B and E). Mount
the countermagnet (6) and the
hinges (1) as previously described.	5

E

Attention!

When the appliance is installed the power supply cable must be easily accessible.

6

4

8

6

71

3

8

2

51