Description of the appliance
Cancelling a programme
To cancel a programme which is running, turn the programme selector dial to the RESET position (H).
Warning! After a programme which ends with water in the drum
(RINSE HOLD 
option), turn the selector dial first to RESET (H) and then to the DRAIN (D) or SPIN (F) programme.
Altering an option/programme which is running
To alter an option, first set the machine to PAUSE by pressing the START/PAUSE button.
Any option can be modified before the machine starts it. After select-
ing the new option press the START/PAUSE 
button again to re- start the selected programme.
To modify the selected programme turn the programme selector dial to RESET (H) and then choose a new programme.
After pressing the START/PAUSE 
button again, the machine restarts with the newly selected programme and the water is not emp- tied out.
Opening the door after the programme has started
You can open the door, after having set the machine to PAUSE, provided the following conditions exist:
•the machine is not in the heating or drying phase beyond 55°C;
•the level of the water is not high;
•the drum is not turning.
If these requirements are met, when you pause the machine the door can be opened.
Should it not be possible to open the door, and should it be absolutely nec- essary to do so, switch the machine off by pressing the ON/OFF button.
After approximately 3 minutes, you can open the door.
Pay attention to the level and temperature of the water in the machine!
When you close the door and press the ON/OFF and START/PAUSE buttons again, the washing machine will resume the programme from the point where it had been interrupted.
16
