Something not working?
Problem | Possible cause | Solution |
Spinning starts late or the machine does not spin
The machine will not dry or the laundry is not dry enough
The unbalance detection | If the laundry is not evenly |
device that prevents | distributed inside the drum |
excessive vibration during | at the beginning of the |
spinning has cut in. | spin cycle, the machine |
| detects this and tries to |
| redistribute it more evenly |
| by means of a few drum |
| rotations. |
| Only when the laundry is |
| more evenly distributed |
| will the spin cycle be |
| performed, at a lower speed, |
| if the laundry is not evenly |
| distributed. |
| If, after about 6 minutes, |
| the laundry is still tangled, |
| the machine will not spin. |
| Therefore, if the laundry is |
| still wet at the end of the |
| cycle, it is advisable to |
| redistribute it manually |
| inside the drum and to |
| select the spin programme |
| again. |
|
|
The water tap is not open | Open the water tap. |
(E10). |
|
The drain filter is clogged | Clean the filter. |
(E20). |
|
The drying time has not | Select the drying time. |
been selected. |
|
An appropriate drying time | Select the appropriate |
has not been chosen. | drying time suitable for the |
| required degree of drying, |
| according to the type of |
| fabric (cottons or synthetics). |
There is too much laundry | Reduce the load. |
inside the appliance. |
|
|
|
40
