Important Safety Information
Erection and connection
•Please follow the separate Installation and connection instructions. If necessary get some advice from your local chimney sweep or building authorities.
•If the tumble drier has to be carried, first remove the base strip!
•Check the tumble drier fortransport damages. Under no circumstances should you connect a damaged appliance! Please contact your supplier in the event of damages.
•Do not install the tumble drier in rooms which are in danger of freezing!
•Install the tumble drier level!
•When installed next to a gas, coal or electric heater: a heat insulating,
•The plug of the appliance must be freely accessible after installation.
•The outgoing air from the tumble drier may not be led into a smoke or chimney flute.
•Do not lead the outgoing air into a shaft which serves to ventilate rooms in which heating is installed.
•Do not install the tumble drier in a room in which heaters with coal and oil connected to a chimney are located in which the under pressure is 0.04mbar or more.
•Provide sufficient ventilation to avoid underpressure from forming.
•In accordance with the technical connection conditions of the power utilities, a permanent connection to the power supply may only be made by an authorised electrician.
•The dryer sucks in air. You should therefore keep the area around the appliance clean and also not store any flammable items that may be sucked into the appliance (e.g. cat litter, shavings) in front of it. There is risk of fire!
7
