Clean the entire filter area

3 The strainer area does not have to be cleaned after every drying cycle, but should be checked regularly and cleaned of fluff if necessary.

6. To do this, grip the top of the large mesh filter and pull it forwards un-

til it comes loose from the two brackets.

7. Remove fluff from the entire filter

area. It is best to use a vacuum cleaner for this purpose.

8. Press both lugs of the large mesh filter into the brackets on the loading door until they snap into place.

9.Re-insert fine strainer.

10.Press against the large mesh filter

until it locks into the interlock.

3 If the fine strainer is not fitted, the large mesh filter will not snap into place and the door cannot be closed.

Cleaning the door seal

1.Wipe the door seal with a damp cloth immediately after the drying cy- cle has finished.

16