1.Open door.

2. Unscrew hinge A from the front of the machine and take off the door.

3.Carefully pry off cover plates B and

C. To do this, insert a thin screwdriver into the slots as shown in the illustration, press downwards slightly and pry out the cover plates.

4. Unfasten locking block D from the snap-on fixture, take out and reinsert on the other side, having rotated the block through 180°.

5. Unscrew hinge A from the door, rotate through 180°, reinsert on the opposite side and screw down.

6.Reinsert cover plates B and C on

the opposite site having first rotated them through 180°.

7.Unscrew cover plates E from the

front of the machine, rotate

through 180, screw on the opposite side.

8. Unscrew door lock F, push down slightly and remove from the front of the machine.

9. Press snap-in button G in and down, press cover down slightly and re-

move from front of the machine.

10. Transfer door lock F to the opposite- side and screw down.

11. Fix cover G on to the other side and allow the snap-in button to lock in

place. 12. Insert door and hinges into recesses

on the front of the machine and screw down.

Note regarding contact protection: The machine is only secure for operations again once all plastic parts have been inserted.

28