Installation and connection instructions
1Installation safety instructions
•Before first starting up, all parts of the transport safety devices must be removed. The machine may otherwise be damaged.
•Before using for the first time, ensure that the nominal voltage and type of current specified on the machine rating plate match the nominal voltage and type of current at the installation site. The elec- trical fuses required can also be found on the rating plate.
•Always connect the plug into a protection contact socket which has been installed as specified.
•With permanent connections: A permanent connection may only be established by an authorised specialist electrician.
•Do not install machine in rooms at risk of frost.
•Ensure that the door of the machine cannot be blocked by interior doors of the house or the doors of other appliances.
•Do not install on deep pile carpets. Air circulation will be hindered at the ventilation slots.
•Ensure that the machine is not placed on its mains cable.
•The tumble dryer must be level when installed.
•Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.
Removing transport safety packaging
1 Caution! Before first using all parts of the transport packaging must be removed. Keep the transport devices for possible subsequent transport (moving house).
1. Open loading door
2. Pull off adhesive strips from inside machine on top of drum.
25