L Y R I C 5 0

LOCATION OF APPLIANCE

This appliance must not be installed in a bed-sitting room of volume less than 20m³ or in a bathroom or shower room. It is essential that the appliance is positioned as stated below. The appliance must be a minimum of 20mm from the rear wall (note that this dimension is provided by the inlet elbow). Shelves, wall cabinets and cooker hoods must not be fitted closer than 500mm to the top of the grill canopy or within 100mm of the sides of the grill. Curtains must not be fitted immediately behind the appliance or within 200mm of the sides of the grill. If fitted next to or between two base units a minimum space of 1mm must be left between the units and the sides of the appliance. The hotplate must be set to a minimum of 7mm above the adjacent units (note that the levelling feet fitted to the appliance will achieve a nominal height to hotplate level of 907mm -5+13mm). Base units not meeting the above conditions must be a minimum of 100mm away from the hotplate. L.P.G. cookers MUST NOT be installed below ground level, i.e. in a basement or fitted aboard any boat, yacht or other vessel.

INSTALLATION

1.PARTS REQUIRED

The loose hotplate parts are packed in the polystyrene fitment on the top of the hotplate. The grill pan, grill pan handle, fixing screws and splashplate fixing screws can be found in the furniture pack which is located in the bottom compartment. The grill pan requires assembly before use (see Fig. 1).

2.GRILL ASSEMBLY

The two splashplate screws should be screwed into the back of the appliance about halfway in (see Fig. 1a.) Engage the keyhole slots in the splashback behind the two screws taking care not to trap the H.T. wire (see Fig. 1b).

Tighten 6 off splashplate screws (see Fig.1c).

Connect the grill supply union at the back of the appliance and pull the grill H.T. lead through the opening in the splashplate. Feed lead through the hole in the top right hand side of the splashplate and connect on to the grill electrode.

Fig.1

Grill Pan Handle Assembly: Assemble grill pan (see Fig.1) and secure two screws provided.

Connect grill H.T. lead to grill electrode

Fig.1a

Fig.1b

Fig.1c

34

Page 33 Page 35
Page 34
Image 34
Electrolux Lynic 50 installation instructions Location of Appliance, Parts Required, Grill Assembly
Page 33 Page 35

Lynic 50 specifications

The Electrolux Lynic 50 is a cutting-edge vacuum cleaner designed to tackle modern cleaning challenges with ease and efficiency. It seamlessly blends powerful suction capabilities with advanced technologies, making it a suitable choice for a wide range of households.

One of the standout features of the Lynic 50 is its powerful suction. Engineered with a high-performance motor, it can handle various types of flooring, from plush carpets to hard surfaces. This versatility ensures that no dirt, dust, or pet hair is left behind, making it an ideal tool for families and pet owners alike.

A notable innovation in the Lynic 50 is its Smart Sensor Technology. This system automatically adjusts the suction power based on the type of surface being cleaned. For instance, it ramps up the suction on carpets to remove deeper-seated dirt and reduces it on hardwood floors to prevent damage. This technology not only enhances cleaning efficiency but also prolongs the life of your floors.

The Electrolux Lynic 50 also prioritizes user convenience with its lightweight design. Weighing in at just over 5 kg, it is easy to maneuver around the home. Its ergonomic handle and compact size make it simple to reach tight corners and high surfaces, reducing the strain associated with prolonged cleaning sessions.

For added convenience, the Lynic 50 boasts a large capacity dustbin, allowing users to clean more without the need for frequent emptying. The bin is designed for easy detachment and cleaning, promoting a hassle-free maintenance routine. Additionally, the vacuum features a HEPA filtration system that captures 99.97% of allergens, making it an excellent choice for allergy sufferers.

Another impressive characteristic of the Lynic 50 is its quiet operation. Unlike many traditional vacuum cleaners, the Lynic 50 operates at a lower noise level, ensuring that you can clean your home without disturbing others. This makes it particularly beneficial for nighttime cleaning or in households with small children.

In summary, the Electrolux Lynic 50 is a powerful, efficient, and user-friendly vacuum cleaner equipped with Smart Sensor Technology, a lightweight design, a large capacity dustbin, and HEPA filtration. Its combination of features makes it a top contender in the vacuum market, suited for anyone looking to maintain a clean and healthy living environment.
Top Page Image Contents