Index Assembly Instruction | Alamo DSEB-D16/SAS guide

INDEX - ASSEMBLY INSTRUCTION

Section 1
Tools and Supplies Needed f/ Assembly		1-2
Pre-Dilivery Check List		1-3 to 1-5
Section 2
Fill Left rear Wheel w/ calcium Cloride		2-2
Wheel Counter Weight Parts		2-2
Wheel Counter Weight Installation		2-3
Section 3
Front Pump Drive Parts		3-2
Crankshaft Pulley Preparation		3-3
Pump Driveshaft Assembly		3-3
Pump Driveshaft Half, Shaft End		3-4
Pump Mount Plate		3-4 to 3-5
Pump Drive Shaft, Tube End		3-5
Pump Installation		3-5 to 3-6
Frame Rail Support Installation		3-7
Section 4
Frame Rail Pre- Assembly		4-2 to 4-6
High Frame Parts		4-7
Frame Rail Pre-Installation		4-8 to 4-11
High Frame Pre-Installation		4-12 to 4-16
Tack Welding Frame Assembly		4-17 to 4-21
Remove Frame for Final Welding		4-21 to 4-23
Section 5
Frame Rails Final Installation		5-2
Boom Rest Installation		5-3
Axle Strap Installation		5-4
Stabilizer Kit Installation		5-4
High Frame Installation		5-5 to 5-8
Tie Up Hoses to Tractor Frame (Stack valve Hoses)		5-8
Section 6
Hydraulic Tank Installation		6-2
Hydraulic Tank Counter Weight Installation		6-2
Hydraulic Tank Oil Level Sight Gauge		6-3
Hydraulic Tank Decal Installation		6-3
Cab Decal Installation		6-4

A-Boom (JD 6615 / 7615 Asy Instruction Manual) 07/03
© 2003 Alamo Group Inc.	Index -4