Alamo DSEB-D16/SAS instruction manual Boom Marked Here HereBolt on Boom Rest Hook Clamp

Boom Rest Plate & Hook Installation

Boom Rest Plate installation:

5.Marking Boom. Use a Black (or color de- sired) to mark the Boom, Make a Line on the Boom parrelel with the Bolt on Boom Rest across the Boom, (See Figure 5 & 6). This line will be used to align the the Boom Plate Rest Hook for welding to Boom.

6.Clamp Boom Rest Hook to Boom. Align Boom Rest Hook with the line on Boom and clamp with large C-Clamp (See Figure 7). Remove Paint if possible (See Figure 8). Weld both sides of the Boom Rest Hook to Boom (See Figure 9) Move Boom back into Boom rest and check for fit.

Boom

Marked

Here

FIGURE 6

Boom

Mark

HereBolt on Boom Rest

FIGURE 5

Marked

Here

Boom

Rest

Hook

C-Clamp

FIGURE 7

Clean off

Paint

before

Welding

FIGURE 8

Weld on

both sides as shown

FIGURE 9

A-Boom (JD 6615 / 7615 Asy Instruction Manual) 07/03

© 2003 Alamo Group Inc. Section 13 - 3