Alamo DSEB-D16/SAS instruction manual High Frame Mounting Tube Componnets

Frame Rail Installation

Frame Rail Pre-Assembly: (continued)

High Frame Mounting Tube Components. (See Figure 3 & 4) These Components are to be laid out and will be tack welded to frame Rails and High frame during Pre-Assembly Process. Locate and ID these Parts for later installation. Remember DO NOT Weld any components untill instructed to do so.

High Frame Mounting Tube Componnets

1

Figure 3

	Machete High		2
	Frame
	2A		1
	RH Frame Rail		4
	Front Shown
2	2A	3	Frame Rail
			(to Rear Axle)

6-3/4"

5

Cut Off	Width of Frame
	Rail Tube

Item	Part No.	Qty	Description
1	---Ref-----	2	Mounting Tubes, (Length will Vary with Mount Kit).
	02918600	4	Bolt, 3/4" X 2" Long (Not Shown)
	00037200	4	Locknut, 3/4" Toplock (Not Shown
2	02966639	7	Bar Mounting Strap
2A	02966639	1	Bar Mounting Strap (Cut In Half)
3	00037200	8	Locknut, Toplock
4	02957039	8	Bolt, 3/4" X 10-1/2" Long
5	02966641	2	Angle Mount

A-Boom(JD 6615/ 7615 Asy Instruction Manual) 07/03

© 2003 Alamo Group Inc. Section 4 - 5