Hose Installation
Pump / Tank Hose Installation:
1.Suction Hose, Tank to Pump. The Suction hose connects to the front RH side of Tank (See Figure 8) and runs through a Hose Ring that is welded to the frame Rail (See Figure 9). The Suction Hose connects to the front Pump on the Left Hand Side of Pump (See Figure 10).
2.Connect Pressure Hoses. There are two pressure hoses that connect to the Pump. The Larger Hose (See Figure 10 & 11) runs through a weld on Hose Ring and to the Cutter Motor Control Valve (See Figure 12). The Small Hose runs to the Cyl. Control Valve. Connect the smaller hose to the pump and route with the larger hose.
From Tank
SUCTION HOSE
Hose Ring
To Pump
Figure 9
Tank Return
Tank SuctionHose Side
Hose Side
Front of Tank &
Front of Tractor
Figure 8
Tank Suction
Hose from Hyd.
Tank
Pump Pressure |
| |
Hose to Cutter |
| |
Motor Control Valve | Pump Pressure | |
|
| Hose Side to Cyl. |
Figure 10 |
| |
| Control Valve | |
Hose Ring
Pump Pressure
Hose to Cutter
Motor Control Valve
Figure 11
Pump Pressure |
to Cutter / Motor |
Valve |
Figure 12 |
© 2003 Alamo Group Inc. | Section 7 - 4 |
