Alamo DSEB-D16 Rear Wheel Counter Weight, Fill Left Rear Wheel with Liquid, Qty Description

Rear Wheel Counter Weight

Fill Left Rear Wheel with Liquid:

The Left Rear Wheel must be filled with liguid. Alamo Industrial recommends a Calcium Cloride Water Mixture. The recommended Ratio of a 30 / 70 mix (30% Calcium Cloride and 70% Water), this mixture will add weight at about 10.5 lbs per gallon. Follow the Mixture procedures furnished by the Manufactured of the Brand of Calcium Cloride that you are useing. It is also recommended that a trained person installs the calcium Cloride. Calcium Cloride must be added in addition to the Steel Wheel Wieght and the Counter Weight that hangs on the Left Side. It is Not recommended to use straight Water in the Wheel as this would not provide protection against freezing. A 30/70 Calcium Cloride Water mixture provides anti-freeze to approx -50 deg. F. below 0.

Rotate Washer to Match Bolt
			4
Circle dia. and Washer fits into		3
Wheel	Weight Slot.

2

1

Bolt is shown extra long in drawing for illustration only

Figure 1

Item	Part No.	Qty	Description
1	02979603	3	Hex Head Bolt, 7/8" NC X 16"
2	02971569	3	Wheel Weight Washer, Special
3	02970758	1	Wheel Weight Casting, 1400 lbs.
4	5JRC1490	3	Locknut, Top Lock 7/8" NC

Note: some Older Units used a All Thread Rod with Hex Nuts Lock Nuts, with Flat Washer and Lock washer. This was replaced with the Bolt Type shown above. These Bolt and Nut combinations will replace the old All Thread type.

A-Boom (JD 6615 / 7615 Asy Instruction Manual) 07/03

© 2003 Alamo Group Inc. Section 2 - 2