Alamo DSEB-D16/SAS Cab Decal Installation, Alamo Group Inc, Side Window. See Figure

Decal Installation

Cab Decal Installation:

1.Install Decals on Windows inside Cab There are 8 decals that need to be installed on Windows and inside Cab of Tractor. Clean all surfaces before installing Decals. Do Not Install any Decals that will interfer with the Operator line of sight. (See Figure 35, 36, 37, 38).

2.Decal Part Number.

1= # 02962107, Valve Operation - 5 Spool or # 02962024, Valve Operation - 4 Spool, (Install in lower Right Hand corner of Tractor Windshield). (See Figure 35)

2= # 02967827, Danger Multi-Hazard (install in upper right corner of Left side window). (See Figure 36)

3= # 02965262, Warning - Hose Burst (Install in upper left corner of Left Side window). (See Figure 37)

4= # 02964677, Warning - Boom Rest (install in upper right corner Right Side Window). (See Figure 38)

5= # 02963524, Attention - Boom Swing (install in upper right corner Right Side Window). (See Figure 38)

6= # 00763977, Notice to Owner (install in upper right corner Right

Side Window). (See Figure 38)

7= # 02965093, Proper Engine Operation (install in upper right corner Right Side Window). (See Figure 38)

8= # 02962748, Pull On to Start - Push to Stop, (Install on "ON"

"OFF" Switch (See Figure 35)

These Decals will need to be installed by the person mounting the A-Boom, Clean all windows and make sure they are dry before installing Decals. DO NOT install any Decals in a position that will interfer with the operators view.

1

8

Figure 35

2

Figure 36

3

Figure 37

45

6

7

Figure 38

A-Boom (JD 6615 / 7615 Asy Instruction Manual) 07/03

© 2003 Alamo Group Inc. Section 6 - 4