Alamo DSEB-D16/SAS Sight Gauge, Return Pressure Gauge, Return Filter, Suction Line, Filler Cap

Fill Hydraulic Tank

Fill Hydraulic Tank with Oil:

5.Fill Tank. Fill the Hydraulic Tank (See Figure 4) Fill tank till the Oil is visable in the sight Gauge (See Figure 5 & 8). This will fill tank for the start but it will have to filled again later.

6.Fill Suction Hose with Oil. Remove the Suction Hose at the Tank (See Figure 6) and fill the hose with clean oil, THIS IS A MUST DO. The Suction Hose must be filled with Oil to prevent Dry strat up of Pump. Dry start up of PUMP will damage the Pump. After filling suction Hose reinstall it and tighten down Hose Clamp. (See Figure 7)

Pressure

Gauge

Sight Gauge

FIGURE 5

FIGURE 6

FIGURE 7

Sight Gauge

FIGURE 8

Return Pressure Gauge

Return Filter

Suction Line

Filler Cap

FIGURE 9

A-Boom (JD 6615 / 7615 Asy Instruction Manual) 07/03

© 2003 Alamo Group Inc. Section 11 - 3