Technical data, Installation | Electrolux QB 5201 guide

24Technical data

The wash results are not satisfactory

The dishes are not clean	•	The wrong washing programme has been se-
		lected.
	•	The dishes are arranged in such a way as to
		stop water reaching all parts of the surface.
		The baskets must not be overloaded.
	•	The spray arms do not rotate freely due to
		incorrect arrangement of the load.
	•	The filters in the base of the washing com-
		partment are dirty or incorrectly positioned.
	•	Too little or no detergent has been used.
	•	Where there are limescales deposits on the
		dishes; the salt container is empty or the in-
		correct level of the water softener has been
		set.
	•	The drain hose connection is not correct.
	•	The salt container cap is not properly closed.
The dishes are wet and dull	•	Rinse aid was not used.
	•	The rinse aid dispenser is empty.
There are streaks, milky spots or a bluish coating	•	Decrease rinse aid dosing.
on glasses and dishes
Water drops have dried onto glasses and dishes	•	Increase rinse aid dosing.
	•	The detergent may be the cause. Contact the
		detergent manufacturer’s consumer care line.

If after all these checks, the problem persists, contact your local Service Force Centre.

Technical data

Dimension	Width - height - depth (cm)	59,6 x 81,8-87,8 x 59,5
Electrical connection - Voltage	Information on the electrical connection is given on the rating
- Overall power - Fuse	plate on the inner edge of the dishwasher's door
Water supply pressure	Minimum - Maximum (MPa)	0,05 - 0,8
Capacity	Place settings	12

Installation instructions

Installation

WARNING!

Any electrical and/or plumbing work required to install this appliance should be carried out by a qualified electrician and/or plumber or competent person.

Image 24

Electrolux QB 5201 user manual Technical data, Installation

Contents

Dishwasher Contents Safety information General safetyChild safety Safety information Installation Product description Control panel A1 2002 + A2 Setting mode Digital displayExtra Silent button Function buttons Setting the water softener First use Setting manually Setting electronicallyExamples Use of dishwasher salt Use of rinse aidTo fill Salt for the first time Adjusting the dosage of rinse aid Daily use Loading cutlery and dishesDaily use Open the door and slide out the baskets to load the dishes Lower basket Cutlery basketLoading cutlery and dishes Upper basket Place the grid insert on the cutlery basketKet Adjusting the height of the upper basket Use of detergent Fill with detergentRaising / lowering the upper basket Multitab function Detergent tablets Adjust the rinse aid dosage Washing programmesActivation/deactivation of the Multitab function Activation/deactivation of the rinse aid dispenser Washing programmes Energy kWh Water litres Setting and starting the programme with delay start Cancelling a delay start or a washing programme in progressSelect and start a washing programme Care and cleaning Cleaning the filtersUnloading the dishwasher Interrupt a washing programme in progress Cleaning the spray arms Care and cleaningNever try to remove the spray arms What to do if… Appears in the digital display Technical data InstallationTechnical data Building-in Installation Adjusting the height of the plinth Water connection Water supply connectionsWater outlet hose connection Locknut must be correctly fitted to avoid water leaks Electrical connection Drain hose spigot Environment concerns Packaging materialPage Page 117956650-122008