Washing programmes 17
Once the programme is running, the "Multitab function" can NO longer be changed. If you want to exclude the "Multitab function " you have to cancel the programme setting and then deactivate the "Multitab function ".
In this case you have to set a washing programme (and desired options) again.
Activation/deactivation of the Multitab function
Press the Multitab button: the corresponding indicator light illuminates. This means that the function is active.
To deactivate the function press the Multitab button again: the indicator light turns off.
If the drying results are not satisfactory we suggest that you:
1.Fill up the rinse aid dispenser with rinse aid.
2.Activate the rinse aid dispenser.
3.Set the rinse aid dosage to position 2.
•The activation/deactivation of the rinse aid dispenser can only be possible with the "Multitab function" active.
Activation/deactivation of the rinse aid dispenser
1.Press the On/Off button. The dishwasher must be in setting mode.
2.Press simultaneously buttons B and C , until the lights of buttons A , B , and C start flashing.
3.Press button B , the lights of buttons A and C turn off while the light of button B goes on flashing. The digital display indicates the current setting:
= Rinse aid dispenser deactivated.
= Rinse aid dispenser activated.
4.To change the setting, press button B again, the digital display indicates the new setting.
5.To memorise the operation, switch off the dishwasher by pressing the On/Off button.
If you decide to turn back to the use of standard detergent system we advise that you:
1.Deactivate the "Multitab function".
2.Fill up the salt container and the rinse aid dispenser again.
3.Adjust the water hardness setting to the highest setting and perform 1 normal washing programme without loading any dishes.
4.Adjust the water hardness setting according to the hardness of the water in your area.
5.Adjust the rinse aid dosage.
