Installing the hood | 11 |
|
Remove the hood.
Drive “lower”wood screws, by hand. Remove screws.
Mount the hood onto the “upper” screws. Drive and tighten the “upper” wood screws, by hand.
Drive and tighten the “lower” wood screws, by hand.
Air de"ector installation
(Recirculating accessories)
Assemble the air de"ector with the duct cover bracket with 4 assembly screws provided as shown.
Measure from the bottom of the air de"ector to the bottom of the hood outlet, as shown.
Connecting the ductwork
Install ductwork, making connections in the direction of air"ow as illustrated.
Push duct over the exhaust outlet.
Wrap all duct joints and the "ange connections with duct tape for an airtight seal.
Make the same connection in the wall or ceiling vent exit.
Cut the duct at the measured size. Uninstall the air de"ector removing the 4 assembly screws.
Slip the duct onto the bottom of the de"ector. Place the assembled de"ector and duct over the exhaust outlet from the hood.
Assemble the air de"ector to the duct cover bracket with 4 assembly screws provided as shown.