Electrolux Santo 1573TK-4 Starting up and temperature regulation, Plug socket, Setting „1 means

Plug socket

The plug socket necessary for con- nection of your appliance to the

electricity supply should be positio- ned so that it is possible to pull out the appliance plug.

If your appliance is installed under

a continuous worktop, the plug socket should be provided as shown.

A concealed protective contact plug socket requires 10 A/16 A

fusing.

If the socket is not accessible once the appliance is built in, the electrical installation must include suitable means of isolating the appliance from the mains (e.g. fuse, cut-out, current trip or similar with a minimum contact separation of 3 mm).

Starting up and temperature regulation

0Insert the plug of the connection lead into the plug socket with protective earth contact. When the refrigerator compartment door is opened, the internal lighting is switched on.

The temperature selector knob is located on the RH side of the refrigerator compartment.

Setting „0“ means: Off.

Turning clockwise in direction „1“: Refrigerating unit on, the latter then operating automatically.

Setting „1“ means:

Hightest temperature, warmest setting.

Setting „6“ (end-stop) means: Lowest temperature, coldest setting.

The temperatures in the refrigerator compartment and freezer compartment cannot be independently regulated.

At a low ambient temperature of around 16°C, setting „1“ should be selected. At ambient temperatures of around 25°C, select setting „2“.

12